Official Lenovo K-50/K3 Rom Enable 5Ghz WiFi with SP Meta Tool
- LENOVO ROM

Official Lenovo K-50/K3 Rom Enable 5Ghz WiFi with SP Meta Tool

Here is the latest Rom version of Lenovo K-50 Official Android Marshmallow 6.0 Stable and Fast. I hope you will enjoy this rom in your smartphone or device.

Official Lenovo K-50/K3 Rom Android Marshmallow 6.0 Overview

Before proceeding, download all the files provided with this guide.

  • Download and Install SP Meta Tools which can be found in SP_META_exe_v1.1544.00.
  • Now Make a backup of your existing NVRAM partition.
  • The APDB file that I have provided here was extracted from a stock S427 ROM.

Check Also VIBEUI V3.1 Rom 1622_5.440.1 Marshmallow 6.0 For Lenovo K50-T5

How to Install Official Stock Rom Lenovo K-50/K3 Rom Enable 5Ghz WiFi with SP Meta Tool

Follow these instructions at your own risk. If your device explodes, melts, catches fire, etc, you’re on your own.

  • Disconnect the K3 Note from the PC and reboot to meta mode by holding Vol Down + Power during boot.
  • The screen should display “Have been in meta mode…”. Once you see this, connect the phone to the PC.
  • Launch device manager and you should have 2 devices with yellow bangs. CDC Serial and MT65xx Android Phone.

  • Double click on CDC Serial and install the drivers manually as below.

  • The driver for CDC serial can be found in the package “SP_Drivers_v1.6.7z”.

  • Repeat steps 4 and 5 for MT65xx.

  • Both devices should now be installed and have no yellow bangs. Please take note of the COM#. In my case, it is 26. Yours will most likely be something else.

  • Launch SP Meta Tool and change the settings as per below.

  • After clicking on reconnect, a new window will appear; ‘AP Editor’. Click on “read from NVRAM”, select the APDB file and click open.

  • A tree will appear in the left side of the window. Expand “AP_CFG_RDEB_FILE_WIFI_LID”, select  ‘1′ and click on “read from NVRAM”.

  • The right side of the window will now be populated. Change the values of ucSupport5GBand and ucEnable5GBand to 0×01. Click on “save to NVRAM”.

  • Reboot the phone to TWRP and delete the folder /data/nvram.
  • Reboot to OS and observe that your device can now detect and connect to 5Ghz wlan networks.

System Requirements Of Lenovo K-50/K3 Note Marshmallow Stock Rom

  • OS version : 6.0
  • Type : Official Stock Rom
  • Android Update : Marshmallow

Official Lenovo K-50/K3 Rom Enable 5Ghz WiFi with SP Meta Tool

Official Lenovo K-50/K3 Note Rom Enable 5Ghz WiFi with SP Meta Tool

Click on the below button to start download Rom Official Stock Android Marshmallow 6.0.1 Lenovo K-50. It is full and complete flash File. Just download and start installing in your phone. We have provided direct link full setup.

SP_META_exe_V1.1544.00 (26 dls)
SP_Drivers_1.6 (24 dls)
APDB_MT6752_S01_alps-mp-m0.mp1_W16 (25 dls)

About TechoFile

Read All Posts By TechoFile