Lenovo S60 Stock Firmware Android 5.0.2 Lollipop a S232_151021

Lenovo S60 Stock Firmware Android 5.0.2 Lollipop a S232_151021

Download And Install Lenovo S60 Stock Firmware Android 5.0.2 Lollipop a S232_151021

Description Of Lenovo S60 Stock Firmware

-First charge the phone battery to 100%

-Vol+ + connect USB on grew to become off mobilephone = download Mode (Qpst, Qfill)
-Vol- + join USB on turned off phone = Diag Mode
-Vol+ + Vol- + vigor Button = Lenovo recuperation (there’s an alternative to show off cell), this is the simplest approach to turn off the cellphone:
-maintain Vol- and Vol+, hold vigor and look ahead to reset. Selected English > flip off

Lenovo S60 Stock Firmware Info

Lenovo S60-a Stock ROM 5.0.2

Warnings Of Lenovo S60 Stock Firmware

This ROM will wipe all user data! Except external SD Card.
If mobile phone after flash is not going to boot up and only lengthy vibrating long hold: VOL- and energy BUTTON (30-120 seconds). Mobile should restart.It occurs when you’re going to flash from different types loader (for example 5.Zero.2 -> 4.4.Four or 4.Four.4 -> 5.Zero.2). Why? Seeing that historic loaders is running and you have flashed the brand new one so you have to restart the telephone but u cannot put off the battery and u ought to lengthy press PWR Button.
Warning 1:
If something went improper and cell is long vibrating and windows see Qualcom MMC (various drives) u can repair it by way of flashing emmc with MiFlash and then maintain VOL- and energy Button and plugin USB Cable.
(alternative u can flash manually with: EMMCRAW_1.4.0.1.Exe, firstly load partition desk gpt_main 0.Bin)
Warning 2:
After flash you should make manufacturing facility reset. Turn off the phone, hold VOL- and push power button. Pick factory reset (it wipe all user data except outside sdcard) and press start.
This is not necessery.

Warning 3:
First boot after flash will soak up about 10 minutes. It has to arrange /information partition. Significantly now not an hour but long time.
After 1 hour hold u can maintain VOL- and maintain vigor button within the same time for 30-120 seconds. Telephone will reset in restoration mode. Then decide upon manufacturing facility reset, after manufacturing unit reset cellphone will vigor Off. Disconnect USB, cell should have black screen. Keep VOL+ and fix USB again. Cellphone will join in download Mode QD load flash it once more with QFIL.

How To Flash Lenovo S60 Stock Rom

Installation Guide

Download Link

Download Lenovo S60 Stock Firmware Android 5.0.2 Lollipop a S232_151021 from the link below

Download Rom
Qualcomm HSUSB USB COM Drivers
Lenovo Usb Driver 1.0.12
(older) S60-a_S227_150806_ROW-QPST-QFIL

About TechoFile

Read All Posts By TechoFile